Secret Codes For Android phones (Galaxy S,I5801,HTC wildfire,Desire)

0

Written on 6:32 AM by sricharan

I found this article few days back, which list a series of secret commands for Android phones. Bear in mind that that codes were obtained from a Samsung Galaxy phones and some of Android phone few may not work in all models.

Please be careful as it’s not always possible to undo the effects of a code (e.g. factory reset). 

*#*#4636#*#*  

This code can be used to get some interesting information about your phone and battery. It shows following 4 menus on screen:
  • Phone information
  • Battery information
  • Battery history
  • Usage statistics
*#*#7780#*#*

This code can be used for a factory data reset. It’ll remove following things:
  • Google account settings stored in your phone
  • System and application data and settings
  • Downloaded applications
  • Contacts saved in phone memory.
It’ll NOT remove:
  • Current system software and bundled applications
  • SD card files e.g. photos, music files, etc.
PS: Once you give this code, you get a prompt screen asking you to click on “Reset phone” button. So you get a chance to cancel your operation.
  
*2767*3855#

Think before you give this code. This code is used for factory format. It’ll remove all files and settings including the internal memory storage. It’ll also reinstall the phone firmware.
PS: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code

*#*#34971539#*#*

This code is used to get information about phone camera. It shows following 4 menus:
  • Update camera firmware in image (Don’t try this option)
  • Update camera firmware in SD card
  • Get camera firmware version
  • Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you’ll need to take your phone to service centre to reinstall camera firmware.

 *#*#7594#*#*

This one is my favorite one. This code can be used to change the “End Call / Power” button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don’t need to waste your time in selecting the option.
  
*#*#273283*255*663282*#*#*

This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo. 

*#*#197328640#*#*

This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.

WLAN, GPS and Bluetooth Test Codes:

*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* – WLAN test (Use “Menu” button to start various tests)
*#*#232338#*#* – Shows WiFi MAC address
*#*#1472365#*#* – GPS test
*#*#1575#*#* – Another GPS test
*#*#232331#*#* – Bluetooth test
*#*#232337#*# – Shows Bluetooth device address
 *#*#8255#*#* - This code can be used to launch GTalk Service Monitor.

Codes to get Firmware version information:

*#*#4986*2650468#*#* – PDA, Phone, H/W, RFCallDate
*#*#1234#*#* – PDA and Phone
*#*#1111#*#* – FTA SW Version
*#*#2222#*#* – FTA HW Version
*#*#44336#*#* – PDA, Phone, CSC, Build Time, Changelist number
 
 
 Codes to launch various Factory Tests:

*#*#0283#*#* – Packet Loopback
*#*#0*#*#* – Screen test
*#*#0673#*#* OR *#*#0289#*#* – Melody test
*#*#0842#*#* – Device test (Vibration test and BackLight test)
*#*#2663#*#* – Touch screen version
*#*#2664#*#* – Touch screen test
*#*#0588#*#* – Proximity sensor test
*#*#3264#*#* – RAM version



*#0011# -- network mode/cell info/power info hidden menu
*#06# view IMEI number

Hope this information is helpful.If you find this info was helpful you can comment on this post.

 

If you enjoyed this post Subscribe to our feed

No Comment

Post a Comment